|
|
|
|
|
|
|
|
|
|
|
Viking
Automatic Fire Sprinkler Heads & Sprinkler Headguards
 |
 |
 |
 |
The Micromatic Fire Sprinkler
Head was designed with safety in mind. The micromatic has a time proven
GLASS BULB operating mechanism. This designs affords a very accurate temperature
sensing system that breaks at a prescise temperature and released the water
to extinguish the fire. There are no o-rings to swell, stick or otherwise
occlude the flow. This precise range enables the engineer, architect
or owner to select the proper head form a wide range of available bulbs
from 135 degree F to 500 degree F. The Microfast head comes in all the
standard designs: upright, pendant, sidewall styles in wet, concealed or
dry models for industrial and residential applications. Many colors are
available is well to match the decor for office, restaurant and residential
uses. Also available in stainless steel body for corrosive environments
or FDA requirements for the food industry. Wax coated, teflon and polyester
are avilable as well. There are residential,
quick response commercial and extended coverage models. Just let us know
you application and I am sure we have a sprinkler head to suit it.
Micromatic
Sprinkler Heads Link
Microfast
Sprinkler Heads Link(Includes Residential Heads)
Mirage
Concealed Sprinkler Heads Link
Dry
Sprinkler Heads Link
. 
.
Victaulic Style Grooved
fittings are widely used in fire sprinkler applications for 2-1/2" and
up pipe sizes. All styles are available to join, reduce, flange, tap, make
ells in 22-1/2,45 and 90 degree. This design enables a flexible or
rigid joint as selected and a joint that is easily disassembled in the
future for repairs or changes. This type of end is available as well on
all types of fire sprinkler valves.
Flanged fittings are widely used in fire sprinkler applications for 2-1/2" and up pipe sizes. All styles are available to join, reduce, flange, tap, make ells in 11-1/4, 22-1/2,45 and 90 degree.This design enables a rigid joint and a joint that is easily disassembled in the future for repairs or changes. This type of end is available as well on all types of fire sprinkler and industrial valves. Threaded joints are generally used up to 2" pipe size.
. 
.
.
These gate valves are normally
provided with flanged ends
CHECK VALVE UL/FM
. 
. 
The
Viking Model J Alarm Check Valve is the only one of its kind made of ductile
iron - a material with higher thermal shock resistance and almost twice
the strength-to-weight ratio of cast or gray iron. The Model J also provides
unsurpassed versatility - it can be mounted horizontally or vertically,
and is available in flange/flange, flange/groove, and groove/groove models.
The
Viking Deluge Valve is a quick-opening valve with only one moving part.
It is more resistant to false-trippings than latch-type valves, and can
be reset automatically without opening the valve. The Viking Flow Control
Valve, a variation of the Deluge Valve, allows smooth closing without water
hammer, and may be used to facilitate manual or automatic on/off control.
Special pressure regulation and speed control trim is also available to
control down stream pressures and to minimize the potential for water hammer.
Viking's
ductile iron Easy Riser"tm" check valve is easily installed and maintained.
It can be used with a waterflow indicator and electric alarm in systems
that don't require a mechanical alarm. The Easy Riser serves as an economical
check valve in Viking Pre-Action and Firecycle systems, and is available
in flange/flange, flange/groove, and groove/groove models
AIR
COMPRESSORS 
The
Viking Maintenance Air Compressor is used to automatically maintain the
air pressure in any size dry system after the system has been filled from
a plant air supply. It can be used as a basic air supply for systems of
150 gallon capacity or smaller. Since the Viking Maintenance Air Compressor
is riser-mounted, it doesn't require floor space and, thanks to its sealed
compressor unit and oil-less electric motor, it doesn't require maintenance.
It includes a factory mounted air supervisory switch and trim piping.
With
its corrosion-resistant construction, adjustable pressure, and replacement
air filter, the Viking Air Pressure Maintenance Device is easily serviced
and provides a dependable way to maintain air pressure
.
. 
.
Hose
Racks & Nozzles,Hydrant Gates &Adaptors, Accessories: Head Boxes,
Wrenches, Siamese Connections,Dry Hydrants,Valve Keys,
Headguards,Escutcheons,Ball Drips, Hydrant Wrenches,Siam Caps(Click on
Image To Go)
.
www.jerman.com, www.fire-sprinkler.com ,www.water-meters.com, www.watermeters.com
We are located in the USA at Daniel L. Jerman Co.,275 Railroad Place, Hackensack, NJ 07601 Phone 800-654-FREE (3733), Fax 201-487-3953, International Phone 201-487-7444
