TestanDrain Family
of Test Valve & Drain Products

 

MODEL 1000

  • Designed to Provide Both the Test Function and the Express Drain Function in a Multistory Installation. 
  • Complies with All Requirements of NFPA-13, NFPA-13R, and NFPA-13D. 
  • Tamper Resistant Orifice Permanently Installed. 
  • Full Range of Sizes from 3/4" to 2". 
  • Available with All Required Orifices 3/8" to 3/4" (ESFR). 
  • Single Handle Operation Provides Positive Shut Off. 
  • Locking Kit Available to Avoid Tampering and False Activation. 

MODEL 1011 

AND 1011T

  • Designed to Provide the Test Function and the Express Drain Function in a Multistory Installation. It has the Added Feature of an Integral Relief Valve with Drainage Piping. 
  • Facilitates NFPA-13 Code which Requires a Relief Valve on all Gridded Systems and Downstream of all Regulating Valves. 
  • UL Listed Relief Valve has Flushing Handle to Remove Debris Causing a Leak. 
  • Unit is Shipped in a Semi-Assembled State for Ease of the System Presure Test. 
  • Full Range of Sizes from 3/4" to 2". 
  • Available with all Required Orifices: 3/8" to 3/4" (ESFR). 
  • Locking Kit Available to Avoid Tampering and False Activation. 

MODEL 3011

  • Designed to Provide an Inspectors Test for a Single Story Gridded System. 
  • Test Orifice Located Indoors to Prevent Freezing. 
  • Eliminates Need to Drain the System After the Hydrostatic Test to Install the Required Relief Valve. 
  • Hours Wasted in Testing, Draining, Reactivating and Component Installation are Now Reduced to Minutes. 
  • Guarantees Pressure Relief Valve Access to the System. 
  • UL Listed Pressure Relief Valve can be Isolated for Service of Replacement without Emptying the System. 
  • Model 7000 Relief Valve has Flushing Handle to Remove Debris Causing a Leak. 

 
 

MODEL 7000

  • Underwriters Laboratory Listed. 
  • Stainless Steel Spring & Bronze Body Construction. 
  • Spring and Disc Internally Guided to Improve Seating. 
  • Integral Flushing Handle Allows Use of System Pressure to Remove Debris Causing Leaks Through Valve Seat and Disc 
  • 1/2" IPT Inlet and Outlet. 
  • 175 PSI is UL Listed and Normally Provided. 
  • 165 PSI Through 205 PSI Now Available for Special Applications. 
  • Other Pressure Settings Available.